Fiberglass reinforced laminates for body armor
A customer recently inquired whether fiberglass laminates offered by ZTelec Group can be used to make body armor. Sure! Fiberglass reinforced laminates can be used as a structural material for bulletproof vests made of multi-layer high performance fiber composites.
In terms of the structure of body armor, its development has undergone lots of changes from the initial rigid materials such as metal, ceramics, and high-performance composite sheets to the high-performance fibers such as aramid fiber Kevlar, ultrahigh molecular weight polyethylene (UHMWPE for short), nylon and other soft materials to this today. The bulletproof vest made from rigid materials solely is too bulky, while the soft type, although fitting the body well, but cannot prevent the impact force of weapons with sufficient initial velocity, so the more common choice is the combination of multi-layer fibers and the metal plate as the inner core. The two categories of protective layers, bonded together by hot pressed technology, can effectively prevent harm to human body. For instance, customers can refer to the following multi-layer composite structure of Kevlar, fiberglass reinforced laminates and aluminum honeycomb core or fiberglass laminates plus aluminum honeycomb core.
1. kevlar + fiberglass reinforced laminates + aluminum honeycomb + fiberglass reinforced laminates + kevlar
2. fiberglass reinforced laminates +aluminum honeycomb + layers of fiberglass reinforced laminates
As for the fiberglass reinforced material, you can use FR4 and G10, both made of electronic grade alkali-free glass fiber cloth impregnated with epoxy resin and cured by hot pressing technology. FR4 has additional flame retardant properties compared with G10, and its mechanical and electrical properties are stronger than G10. If there is a need for fire resistance, FR4 can be an ideal material.
Bulletproof vests made of multi-layer fiber composites work on the principle that when a bullet hits the vest, it first comes into contact with the multi-layer mesh structure formed by the Kevlar or fiberglass, which can "catch" the bullet fired by the gun or absorb the impact force of the blast fragments. Different layers in the fabric will also have different roles, such as to resist the speed of the bullet, to prevent sharp objects stabbing, etc. This first line of defense consumes most of the energy of the bullet and acts as a cushion. Fiberglass laminates and aluminum honeycomb core will provide further protection.
- more+releated article
- 2023-12-05DMD electrical insulation material characteris
- 2023-12-04g10 fiberglass epoxy laminate sheet
- 2023-12-04Differences and differences between g10 and fr
- 2023-11-30What is fr4 and what electrical characteristic
- 2023-11-27What is phenolic cotton laminate and what are
- 2023-11-24How to choose a solar transformer, what are th
- 2023-11-23g11 material properties and Electrical Propert
- 2023-11-21What are the differences between phenolic clot
- 2023-11-15Which transformer for solar energy
- 2023-11-09Solar power station step-up transformer compos