INDUSTRY NEWS

The epoxy resin fiberglass cloth laminated rod is made up of flexible rod fiberglass or similar material

2020-08-19 17:21  |  By: ZTELEC-www.ztelecgroup.com  |  151click

The epoxy resin fiberglass cloth laminated rod is a round rod formed by impregnating alkaline glass cloth with epoxy resin by hot-pressing through the forming mold. It has high mechanical and dielectric properties. The epoxy resin fiberglass cloth laminated rod is suitable to be used as insulation parts in electrical machinery and electrical equipment, and can be used in humid environment and transformer oil.

Appearance of epoxy resin fiberglass cloth laminated rod

The surface should be smooth, free from bubbles, oil stains and impurities, and allow uneven color, scratch and slight height inequality without prejudice to use. Laminated glass rods with a diameter of more than 25mm are allowed to have cracks in the end face or section that do not interfere with use.

Main performance indexes of epoxy resin fiberglass cloth laminated rod

No. Item name Unit Test method Index
  

  
3841 3842 3848
  

  

  

  
1 Density g/cm 5.1.3 in JB/T56073.26 ≥1.70 (1.77) (1.91)
2  
Water absorption diameter
6mm~12mm
≥13mm
% JB/T5134 ≤0.75
≤0.50
-
-
-
-
3 Nomal bending strength 150℃ Mpa 5.1.3 in JB/T56073.26 ≥241
_
(644)
(328)
(730)
(460)
4 Compression strength Mpa 5.1.3 in JB/T56073.26 ≥241 (302) (470)
5  
Parallel layer breakdown voltage in(20+5)℃ transformer oil
KV 5.1.2 in JB/T56073.26 ≥15 (25.3) (36.4)

leave a message

If you are interested in our products, please feel free to contact us!or send email to us!Email address:sales@ztelecgroup.com

more+releated article
email whatsapp inquiry