ELECTRICAL LAMINATED SHEET

G10

Colorful G10 fiberglass laminated sheet is board-like laminated products manufactured by electronic grade fiberglass cloth and heat-resistant epoxy resin. Its insulation class is F class.

contact info

product description

Description of G10 

Colorful G10 fiberglass laminated board is also called epoxy resin alkali-free fiberglass laminated board. It is made by electronic grade fiberglass cloth impregnated with heat-resistant epoxy resin under hot pressing with stable electrical insulation property, good flatness, smooth surface and standard thickness tolerance. Colorful G10 fiberglass laminated board produced by ZTelec Group has various colors and types and its insulation class is F class.

Application of G10

It is suitable for products with high requirements on electronic insulation performance,for example, FPC reinforced board, high temperature resistant board for wave soldering,precision star wheel, PCB test stand, deflection coil terminal board, electronic switch insulation board, copper clad plate substrate, etc. It can also be used to make insulation partitions and pads for electrical equipment, insulation parts for transformer and motor, etc.

Property Parameter of G10

Executive Standard: GB-T 1303-2009 - IEC60893-2004

 

Number Item Unit Value
1 Density g/cm3 1.8-1.95
2 Water Absorption(Thickness:1-20mm) mg 17-73
3 Flexural Strength at Perpendicular Lamination MPa ≥340
(Under Normal)
4 Impact Strength at Parallel Lamination KJ/m2 ≥38
(Simple Supported Beam)
5 Dielectric Strength at Perpendicular Lamination(Transformer Oil at 90℃)(Thickness:1mm) KV/mm ≥14.2
6 Breakdown Voltage at Parallel Lamination KV ≥40
(Transformer Oil at 90℃)
7 Dielectric Constant(50Hz) - ≤5.5
8 Dielectric Loss Factor(50Hz) - ≤0.04
9 Insulation Resistance after Immersion Ω ≥5.0×1010
10 Thermal Index - 155

leave a message

If you are interested in our products, please feel free to contact us!or send email to us!Email address:sales@ztelecgroup.com

email whatsapp inquiry