Electrical Insulation Crepe Paper(Pipe)

electrical, insulation, crepe paper
electrical, insulation, crepe paper
electrical, insulation, crepe paper
send email
chat online
leave message

Electrical insulation crepe paper
Description:  
This product is made of insulating kraft paper processed by crinkling. It has high compatibility with the transformer oil, which can be used in oil-immersed transformer, mutual inductor and electric reactor.
insulation crepe paper     electrical crepe paper

Crepe Paper Pipe     
Description:      
This product is made in a rolled process with electrical crepe paper and mainly used in oil-immersed transformer as insulation wrapping.
Pipe Diameters: Ф4*Ф8*1000/Ф8*Ф14*1000/Ф10*Ф20*1000 (The product's diameter are negotiable.)
Package&Storage: Packed in plastic bag and carton. Store in dry and clean room at room temperature. Keep away from sunlight, moisture and fire.The storage period is 12 months.
insulation crepe paper pipe     electrical crepe paper pipe
 

Semiconductor Crepe Paper
Description:  
The product's electric conductivity is between that of the conductor and the semiconductor and it is used in mutual inductor, transformer, power cable, partial discharge control component of switchboard at the high voltage of below 750kV .
Semiconductor Crepe Paper      Semiconductor Crepe Paper

Electrical Insulation Crepe Paper Technical Data
Standard:JB/T 10441.3-2004
No. Properties Unit Base Paper Thickness
0.05mm 0.075mm 0.13mm
1  Thickness of  Crepe Paper mm 0.35±0.05 0.38±0.08 0.70-0.90
2 Ash Content % ≤0.7 ≤0.7 ≤0.8
3 Moisture Content % ≤7.0 ≤7.0 ≤8.0
4 Water Extraction PH - 6.0-8.0
5 Oil Contamination % <0.1
6 Tensile Strength MD N 30 40 50
CD N 20 30 40
7 Oil Absorption Height MD mm/10min ≥7.0
mm/60min ≥30.0
CD mm/10min ≥20.0
mm/60min ≥50.0
8 Crepe Ratio % 50
9 Power Frequency Breakdown Voltage V/layer ≥950 ≥1000 ≥1000
10 Conductivity ms/m - - ≤10
11 Appearance density g/m² 60±10% 110±10% 120-150

Semiconductor Crepe Paper Tehnical Data
No. Properties Unit Index value Typical Value
1 Gram weught g/m2 105-120 110
2 Drawing Index Nm/g ≥28 42
3 Drawing Intension Kn/m ≥2.1 3.0 
4 Break Elongation % ≥45 50
5 Resistivity 1--10 2.5
6 Test Climate Temperature:23℃±2℃, Humidity 40%±5%RH
Note:The data in the above table only represents typical or average data, just for reference in practical application. It does not bear any responsibility for the use of the product or related legal liability.
Package&Storage: Packed in plastic bag and carton. Store at room temperature. Keep away from sunlight, moisture and fire.The storage period is 12 months.
Transaction process

About Us

ZTELEC GROUP-introduce
ZTELEC GROUP-service
ZTELEC GROUP-history
ZTELEC GROUP-partner

Leave a Reply

Your email address will not be published. Required fields are marked *